Concentrated Neutral pH All Purpose Cleaner

For daily use on floors, showers, glass and other hard surfaces. This one product can clean your entire facility. Removes mold stains and soap scum on tile, grout, bathtub surfaces and fixtures.

Packaged: Single 3.78L Fast Draw or Case of 4 x 3.78L Fast Draw

DIRECTIONS FOR USE

Not effective against rust stains. Dilute with cold water only.

For GENERAL PURPOSE dilute 1:32 - 1:64 oz or 4 oz./gal - 2 oz./gal depending on soil level. Spray and wipe. GLASS: Dilute 1:64 or 2 oz./gal. Spray and wipe.

SHOWERS: Dilute 1:32. For large areas use a portable pump up sprayer. Spray on tile, grout, fixturesand tub surfaces. Let stand for 5 minutes and rinse. For heavier stains agitation with a brush or sponge may be necessary to completely remove the stain.

FLOORS: Dilute 1:64. Add directly to grout scrubber for removal of mold stains, soap scum, hard water deposits, or other common restroom soils.

CARPET SPOTTING: Dilute 1:10 or 12 oz/gal. for heavy soils, dilute 1:20 or 6 oz./gal. for light to medium soils. For coffee as well as other water based stains. Apply a small amount of liquid to the stain. Agitate with a bone scraper and let stand for 3 - 5 minutes. Blot dry and rinse with clean water. Repeat as needed until the stain is completely removed.

PRESPRAY: For use as a prespray, vacuum carpet. Dilute 1:20 with water. Apply at a rate of 50 - 100 sq. ft/gal. Let stand for 3 - 5 minutes before extracting. Always test first in an inconspicuous area Apply a small amount, press with an absorbent white cloth for 10 seconds and see if there is any dye transfer.

SPECIFICATIONS

MATERIAL SAFETY DATA SHEET

BETCO-33647